:orphan:

==========================================================
CURRENT MOBILE (ANDROID) – NEW MOBILE (ANDROID)
==========================================================

To perform the migration of the AuthControl Mobile V5 application in its 5.4.2 version to the AuthControl Mobile Authenticator (AMA) application in its 115(1.1.14) version from a mobile with an Android operating system to another new mobile with the same Android operating system, the following must be carried out Steps:

**Step 1:** Verify that the AuthControl Mobile V5 app is updated on the device to version 5.4.2, otherwise you will need to run the app update. (Go to the info page of the application and verify that the information it shows you is the one indicated in the figure 29).

.. figure:: /images/MobileAPP/Migration/figure29.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 29
   :align: center

   Figure 29

If the information shown on the screen of your mobile is different from that presented in figure 29, check step 1 of item 4.1 literal "a" to update the application.

**Step 2:** In the new mobile, download the AuthControl Mobile Authenticator (AMA) app in its 7.0.0 version from play store (see figure 30), preconfigure the app so that it is ready for provisioning (review annex 1 as a guide to preconfigure the application).

.. figure:: /images/MobileAPP/Migration/figure30.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 30
   :align: center

   Figure 30

**Step 3:** Launch the AuthControl Mobile Authenticator (AMA) app, once on the home page of the app, click on the Menu option located at the top right of the screen (see figure 31).

.. figure:: /images/MobileAPP/Migration/figure31.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 31
   :align: center

   Figure 31

**Step 4:** When entering the Menu page, the following options will be displayed on the screen: “Logs”, “About this App”, “Migration” and “App settings”. Click the "Migration" option (see figure 5).

.. figure:: /images/MobileAPP/Migration/figure32.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 32

**Step 5:** The Migration page will be displayed on the screen with two options: “Read QR code from another device (Read QR code)” and “Receive data from the same device (Get Token)” (see figure 6).

.. figure:: /images/MobileAPP/Migration/figure33.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 33

**Step 6:** Press the “Read QR Code” option. Once you have clicked on the “Read QR Code” option, a dialog window is displayed with the Migration Code and two options: “Cancel” and “OK”. Memorize (write down) the Code, click the “OK” option, minimize the application and enter the AuthControl Mobile V5 application (see figure 34).

.. figure:: /images/MobileAPP/Migration/figure34.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 34

**Step 7:** Enter the AuthControl Mobile V5 app, on the home screen where the OATH code is displayed, click on the options menu at the top left of the screen, the following options will be displayed: “OATH”, “Information”, “About”, “Settings”, “Migration”, “Email” and “Direct call” (see figure 35 and figure 36).

.. figure:: /images/MobileAPP/Migration/figure35.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 35

.. figure:: /images/MobileAPP/Migration/figure36.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 36

**Step 8:** Click on the “Migration” option. Two options will be displayed on the screen: “Create the QR code to read it on another device (Create QR Code)” and “Create the TOKEN and send the data to the same device (Send the data)” (see figure 37).

.. figure:: /images/MobileAPP/Migration/figure37.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 37

**Step 9:** Click on the “Create QR Code” option, a dialog box is displayed for you to enter the Migration code, with the “Clear” and “OK” options (see figure 38).

.. figure:: /images/MobileAPP/Migration/figure38.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 38

**Step 10:** Enter the code generated by the AuthControl Mobile Authenticator (AMA) app, and press the “OK” option (see figure 39, code we got in step 6, figure 34).

.. figure:: /images/MobileAPP/Migration/figure39.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 39

**Step 11:** The application performs its internal migration process and presents a dialog box asking, Which OS would you want to migrate? With the “ANDROID” and “IOS” options, click on “ANDROID” (see figure 40).

.. figure:: /images/MobileAPP/Migration/figure40.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 40

**Step 12:** Once "Android" is pressed, the app performs an internal process and generates a QR code that must be scanned from the AuthControl Mobile Authenticator (AMA) app on the new mobile (see figure 41).

.. figure:: /images/MobileAPP/Migration/figure41.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 41

**Step 13:** Take the new mobile and press OK in the dialogue window where the Migration Code was presented, the Window with the camera will be displayed to scan the QR Code that was generated in the AuthControl Mobile V5 application (see figure 42).

.. figure:: /images/MobileAPP/Migration/figure42.jpg
   :height: 400 px
   :width: 200 px
   :alt: Figure 1
   :align: center

   Figure 42