ANDROID OPERATING SYSTEM

To carry out the migration from the AuthControl Mobile V5 application of its version 5.4.2 to the AuthControl Mobile Authenticator (AMA) application in its version 115(1.1.14) on the same mobile with Android operating system, you must perform the following steps:

Step 1: Verify that the AuthControl Mobile V5 app is updated on the device to version 5.4.2, otherwise you will need to run the app update. (Go to the info page of the application and verify that the information it shows you is the one indicated in the figure 1).

Figure 1

Figure 1

If the information displayed on the screen of your mobile is different from that presented in figure 1, follow the next step.

  1. Enter the device configuration, then applications, in the list of installed applications locate the name AuthControl Mobile V5, select and press app details. Information like the one shown in the following figure will be presented on the screen of your mobile.
Figure 1

Figure 2

Press the update button and wait for the process to finish. Once the application update is finished, enter the application info page and you will be able to see the information as shown in figure 1. Validate that the application is working correctly, to continue to the next step.

Step 2: Download the AuthControl Mobile Authenticator (AMA) app in its 115(1.1.14) version from play store (see figure 3), preconfigure the app so that it is ready for provisioning (review annex 1 as a guide to preconfigure the application).

Figure 1

Figure 3

Step 3: Launch the AuthControl Mobile Authenticator (AMA) app, once on the home page of the app, click on the Menu option located at the top right of the screen (see figure 4).

Figure 1

Figure 4

Step 4: When entering the Menu page, the following options will be displayed on the screen: “Logs”, “About this App”, “Migration” and “App settings”. Click the “Migration” option (see figure 5).

Figure 1

Figure 5

Step 5: The Migration page will be displayed on the screen with two options: “Read QR code from another device (Read QR code)” and “Receive data from the same device (Get Token)” (see figure 6).

Figure 1

Figure 6

Step 6: Press the “Get the token” option. Once you have clicked on the “Get the token” option, a dialog window is displayed with the Migration Code and two options: “Cancel” and “OK”. Memorize (write down) the Code, click the “OK” option, minimize the application and enter the AuthControl Mobile V5 application (see figure 7).

Figure 1

Figure 7

Step 7: Enter the AuthControl Mobile V5 app, on the home screen where the OATH code is displayed, click on the options menu at the top left of the screen, the following options will be displayed: “OATH”, “Information”, “About”, “Settings”, “Migration”, “Email” and “Direct call” (see figure 8 and figure 9).

Figure 1

Figure 8

Figure 1

Figure 9

Step 8: Click on the “Migration” option. Two options will be displayed on the screen: “Create the QR code to read it on another device (Create QR Code)” and “Create the TOKEN and send the data to the same device (Send the data)” (see figure 10).

Figure 1

Figure 10

Step 9: Click on the “Send the data” option, a dialog box is displayed for you to enter the Migration code, with the “Clear” and “OK” options (see figure 11).

Figure 1

Figure 11

Step 10: Enter the code generated by the AuthControl Mobile Authenticator (AMA) app, and press the “OK” option (see figure 12, code we got in step 6, figure 7).

Figure 1

Figure 12

Step 11: The app performs its internal migration process and presents the dialog box that the AuthControl Mobile Authenticator (AMA) app has been provisioned correctly, or if there was any error in the process, it indicates that the app was not provisioned (see figure 13).

Figure 1

Figure 13